All orders are shipped locally with DPD. Place your order before 1 p.m. (Mon-Fri) for delivery the following business day.

DynaVap M 2021

Rating:
4.65

£73 £78 You save: £5

SKU
ignore-this-61
Free shipping with DPD “Next Day Delivery”
The TightVac MiniVac keeps your herbs fresh and the smell contained inside
TightVac - MiniVac 0.12 L
£6 £8

The best way to store your herbs is in an original TightVac MiniVac! After adding your herbs and closing the lid, push the button to pull the air out. Your herbs are now kept fresh and no smell is leaking out from the MiniVac. To open, push the button again and remove the lid.

The TightVac MiniVac has a capacity of 0.12 L which fits approximately 10 to 30 grams of herbs, depending on the herb density. Thanks to the innovative design it's extremely strong, completely airtight, and fully water-resistant.

The Deluxe DynaKit for DynaVap vaporizers has everything you need to keep your vape in the best condition.
DynaVap - DynaKit: Deluxe
£29 £38

The DynaKit: Deluxe by DynaVap is full of spare parts and cleaning products you can use to keep your DynaVap vape in top condition. Cleaning your vape is very rewarding and it also helps to keep the taste of your VapCap vapour optimal.

Included in this kit is the Cyclone II Triple Torch, a wind-resistant torch lighter perfect for heating your DynaVap vape, a fat mouthpiece, three titanium diffusers to filter the air, the DynaMag to provide touch-free handling of a hot cap, a small SnapStash to store herbs in and two storage tubes to transport your vape in.

To maintain your DynaVap vape this kit includes the DynaWax, five cotton pipe cleaners and two different sets of O-rings.

Includes:

  • Cyclone II Triple Torch (empty) (1)
  • Fat mouthpiece (1)
  • Titanium CCD (3)
  • DynaMag (1)
  • SnapStash (small) (1)
  • Storage tubes (2)
  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-Temp O-rings (5)

The DynaKit: Deluxe is compatible with the following DynaVap vaporizers:

The DynaTec Apollo 2 Induction Heater from DynaVap is perfect to heat your VapCap with at home.
DynaVap - DynaTec Apollo 2 Induction Heater
£101 £135

DynaVap has revolutionized the VapCap heating with the new DynaTec Apollo 2 Induction Heater! Using an induction heater is a completely different way to heat your DynaVap VapCap as it doesn't heat your material with a flame, instead, it uses a protected coil to heat around the cap. The DynaTec Apollo 2 will work with both a stainless steel and a titanium tips and will reach temperature in only 5 to 8 seconds.

A switch is built into the chamber so that the heater will only activate when a DynaVap VapCap is inserted, indicated by a red light, and on top there is also a magnet to cool your cap more quickly after use which helps you to save more material.

Compared to using a torch, it heats to a lower temperature, so it’s perfect for flavour chasers and those who prefer cooler temperatures. For hotter draws, leave the vape in for an extra second or two after the click.

An auto-shutoff feature limits heating to a maximum of 15 seconds at a time to keep things safe. DynaVap provides a 12-month warranty period in case you experience any problems.

The DynaTec Apollo 2 Induction Heater will make your DynaVap VapCap easier to use, more convenient, and with better flavour - what more can you ask for?

Includes:

  • DynaVap DynaTec Apollo 2 Induction Heater
  • Power supply
  • Two-prong EU-plug
  • EU/UK-adapter
  • Instruction manual

Intended for use with: DynaVap M 2021 and DynaVap Omni 2021.

Enjoy portable induction heating with the DynaTec Orion Induction Heater especially made for DynaVap vapes.
DynaVap - DynaTec Orion V2 Induction Heater
£158 £211

The DynaVap DynaTec Orion Induction Heater is an extremely lightweight, portable, heating system made especially for DynaVap vapes. Enjoy flavourful and consistent vapour with your DynaVap VapCap wherever you go! The battery has a capacity of 1000 mAh which is enough for 50 heat-ups on average and it works with both titanium and stainless steel tips.

You don't have to worry about pushing any buttons as the Orion Induction Heater senses when the VapCap is inserted. To operate just insert the DynaVap VapCap into the chamber until you see the orange light blinking and listen for the click to indicate that it's heated (or count the blinks). In just four to six seconds your material will be heated to perfection and you'll be ready for luxurious, tasty vapour. An automatic shut-off feature limits heating to a maximum of 10 seconds at a time.

The included zippered case also fits not only your Orion but also the USB-C charging cable, the included SnapStash, and has room to safely store your VapCaps.

The DynaTec Orion Induction Heater is designed and assembled in the USA and comes with a 1-year warranty.

Includes:

  • DynaVap DynaTec Orion Induction Heater
  • DynaVap DynaTec Zipper Case
  • USB-C charging cable
  • SnapStash (small)
  • Instruction manual

Intended for use with: DynaVap M 2021 and DynaVap Omni 2021.

The Vertigo Cyclone II Triple Torch is an affordable torch lighter with a clear fuel tank.
Cyclone II Triple Torch
£10 £13

The Vertigo Cyclone II Triple Torch is one of the most budget friendly torch lighters you will ever find. It features a large, clear fuel tank so you’ll always know how much fuel remains and it also makes refilling it a lot easier. The rounded design fits nicely in your hand while the dial on the base of the lighter easily adjusts the size of the flame with a quick turn. The wind resistant flame is capable of lighting at 3'500 meters above sea level.

Fill it with butane gas before use (not included). Do not clean with alcohol as this will degrade the plastic, resulting in fuel leaks.

The DynaStash is the optimal accessory to store your DynaVap VapCap (and some herbs!) in.
DynaVap - DynaStash (Walnut)
£35 £47

The DynaStash is the perfect complement to a DynaVap vape. It has a large compartment to hold a generous amount of herbs which makes it super easy to load your DynaVap. All you have to do is press your DynaVap into the material, twist, and then you are ready to start vaping!

It also features another compartment to store your DynaVap, so you have everything you need (except the heat source) in one place. On top of the DynaStash is a strong magnet that can be used to store your DynaVap when not in use, as well as to help cool it down between hits.

Intended for use with: DynaVap M 2021.

Keep your DynaVap in great condition with the help of the Maintenance DynaKit.
DynaVap - DynaKit: Maintenance
£10 £13

The DynaKit: Maintenance helps you clean your DynaVap vape quickly and efficiently. The included DynaWax should be used to keep the O-rings well lubricated.

Since O-rings are small and easy to lose, this kit includes eight additional ones. There are two different types of O-rings that come with the DynaKit Maintenance; condenser O-rings and high-temperature O-rings.

Includes:

  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-temperature O-rings (5)
The kit is compatible with the following DynaVap models:

With the DynaCoil you can vaporize concentrates with your DynaVap vape.
DynaVap - DynaCoil
£18 £25

The DynaVap DynaCoil is designed to fit inside the Cap of your DynaVap vape letting you use it with your favourite concentrates or other sticky substances. To use it, all you need to do is to remove the herb screen from your cap, insert the DynaCoil, place your concentrate directly on the coil, heat, and enjoy.

Note that the DynaCoil arrives rolled up and shouldn't be unrolled for any reason.

Intended for use with: DynaVap M 2021 and DynaVap Omni 2021.

Use the Fat Mouthpiece if you want to connect your DynaVap vape to a water pipe (14 mm).
DynaVap - Fat Mouthpiece
£3 £4

The DynaVap Fat Mouthpiece will fit onto the end part of all DynaVap models. It can be used as an extra mouthpiece for sharing among friends or it can be used as a water pipe adapter, fitting all female 14 mm connections which enables you to easily turn your DynaVap vape into a water-cooled vaporizer.

Please note - the Fat Mouthpiece will not fit into the opening of the DynaStash, you must remove it before placing your DynaVap into the DynaStash.

Intended for use with: DynaVap M 2021 and DynaVap Omni 2021.

The DynaVap Stainless Steel Screens keeps your vapour pure and tasty.
DynaVap - Stainless Steel Screens (3-pack)
£4 £6

The Stainless Steel Screens go in between the chamber and the tip of the VapCap to keep the vapour pure and free from fine particles from your herbs. These screens are compatible with both the titanium and stainless steel tips.

Includes:

  • Stainless steel screens (3)

Intended for use with: DynaVap M 2021 and DynaVap Omni 2021.

The DynaVap Low Temp. Captive Cap has a unique logo on it to differentiate it from the normal Captive Cap.
DynaVap - Low Temp. Captive Cap
£18 £25

The DynaVap Low Temp. Captive Cap provides a whole new experience with your DynaVap VapCap vape. By clicking earlier in the heating cycle, it helps you be more consistent with your heating times, enabling you to vape your herbs with less risk of combustion and enjoy a more complex flavour profile. The Low Temp. Captive Cap also comes with a unique logo on it to differentiate it from your standard Captive Cap.

The DynaVap Low Temp. Captive Cap was designed for the DynaVap VapCap M but will fit any VapCap. If you’re looking for cooler vapour, or want to experience more flavour from your herbs this is a great accessory to have.

Intended for use with: DynaVap M 2021 and DynaVap Omni 2021.

The DynaVap Captive Cap helps distribute the airflow better.
DynaVap - Captive Cap
£18 £25

The new DynaVap Captive Cap helps keep the cap in place while also allowing for a more even distribution of the airflow. If you’ve ever had the cap get dislodged off of your DynaVap during a heat up, you’ll really appreciate the new design of this cap. The “click” you hear when the vape has heated up, or cooled down is also more distinct and easier to hear.

The DynaVap Captive Cap was designed for the DynaVap VapCap M but will fit any VapCap. If you’re looking for a replacement cap or just want something new, the Captive Cap is a great option.

Intended for use with: DynaVap M 2021 and DynaVap Omni 2021.

The On Balance Champion is a Pocket Scale that can weight up to 500 g with 0,01 g accuracy
Pocket Scale - 1000 × 0.1 g
£16 £21

The original On Balance Pocket Scale still retains its reliability and accuracy after all these years. Perfect for measuring your herbs or concentrates! The On Balance Champion weighs up to 1000 grams with a 0.1 gram accuracy. It fits in most pockets and can be brought with you everywhere! 

Capacity: 1000 g, 35.28 oz
Accuracy: 0.1 g, 0.01 oz
Units: g, oz, dwt, ozt
Auto shut-off: 60 seconds
Batteries: 2x AAA batteries (included)
Dimensions: 118 × 80 × 20 mm
Weight: 140 grams

DynaVap M 2021 Features

  • Newest version! (2021.09)
  • Made of stainless steel
  • Perfect for micro-dosing
  • On-demand vapour
  • Unique “clicking” cap
  • Hybrid heating
  • Fully recyclable packaging
  • Designed and manufactured in USA

Who is the DynaVap M 2021 for?

The VapCap M 2021 by DynaVap is perfect for anyone looking for an easy-to-use, manually controlled vape with a practically indestructible build. The simple design produces tasty, reliable vapour and allows for stealthy vape sessions where other vaporizers would draw too much attention.

The new things on this version are the revamped chiral airport, an “M’ shaped air intake for easy rocking and adjustments, and updated geometrical indentations on both the tip and body for a slick, stylish finish.

What’s new with the “M” edition?

To ensure maximum flavour, the DynaVap M 2021 is still constructed from medical grade stainless steel but it now features the new “Captive Cap” with two small indentations near the end to keep the cap securely in place without affecting the airflow.

Another great feature is that you can adjust the bowl size to half the size for easier micro-dosing. If you are a fan of cooling the vapour you will also appreciate the improved tapered mouthpiece which lets you connect it to a water tool quick and easy.

Lastly, DynaVap has also ditched the plastic packaging and are now shipping the VapCap M 2021 in a 100% recyclable cardboard package that can also be used as a case.

Manually controlled

The DynaVap M 2021 can be heated by practically any external heat source, such as a blowtorch or induction heater. Thanks to this ingenious design it can deliver powerful and tasty hits from tiny amounts of herbs, instantly. The ‘cap’ makes an audible click when it has have reached the minimum temperature and is ready to start the vapour production.

With the DynaVap M’s manual heating, you’re in complete control of the vapour density. Create fast and light vapour, or a thick and heavy vapour, depending on where you heat the cap. Even with the small bowl size, every hit is full of potency and flavour.

Custom bowl size

If you like to match your herb consumption with the occasion you will appreciate that the DynaVap M 2021 bowl has two settings - 0.1 grams and 0.05 grams. Perfect for micro-dosing! The stainless-steel bowl is surprisingly effective, even with small amounts of herbs loaded. It's also quick to reload, so you can vape the next bowl quickly after finishing the last one.

It’s capable of vaporizing the entire bowl in 1 to 2 hits but if you don’t finish you can even return to the same bowl later since the DynaVap M 2021 does not heat your herb between inhales.

Convenient to bring everywhere

The DynaVap M 2021 is 9 centimetres long and weighs only 19 grams, which makes it one of the smallest vape on the market. It’s not just the perfect vaporizer for festivals and camping, it’s also ideal for any traveller as the and the only other things you need are a lighter and some herbs. No other portable dry herb vaporizer offers such instant and powerful vapour at such a reasonable price.

How to use it?

Load the DynaVap M 2021 by either adding your herbs to the top or press the tip in the herbs a few times to load it. Use your finger to dust off any excess herbs and put the cap on.

Once your bowl is filled, heat the cap with either a torch or an induction heater until you hear the famous DynaVap “click” that lets you know it’s ready to be used. You can control the airflow by covering the air intake while hitting for thicker vapour, or leave it uncovered for lighter and smoother hits.

Warranty

All DynaVap M 2021 vaporizers sold by MagicVaporizers, an authorized distributor of DynaVap products, are authentic and backed by a 2-year warranty, restricted to normal use.

DynaVap M 2021

In the Box

  • DynaVap VapCap M 2021
  • Recyclable packaging
DynaVap M 2021

Specifications

More Information
Size: 9,2 × 1,2 × 1,2 cm
Weight: 20 g
Heating: Hybrid (Convection+Conduction)
Heat-up time: 12 seconds
Power source: Torch or Induction
Temperature: 150°C to 230°C
Manufacturer: DynaVap
Warranty: 2 years
Country of manufacture: United States
Write your own review about DynaVap M 2021
You're reviewing:DynaVap M 2021
Rating